Mortars

“Grout Fluid” mortar

High-strength mortar with a fluid consistency, formulated with additives that provide slight initial expansion. Allows filling the voids between precast concrete slabs and the ground. Suitable for machinery anchoring.

Supply formats

25 kg bag

Main uses

Supply formats

25 kg bag

Instructions

The supports on which the mortar will be applied must be free of dust, paint, oils or other substances that could impede proper adhesion. If the supports are absorbent, it is advisable to moisten them beforehand before application, but without allowing any standing water.

Mix the mortar with the required amount of water to achieve the desired consistency. For a fluid consistency, use between 13.5% and 14% by weight of water (3.25–3.5 litres per bag). Pour the mortar into the cavity to be filled. To make the most of the mortar’s expansive properties, it is recommended to use it within the first 15 minutes after mixing.

In deep holes, it is advisable to insert a tube to aid the expulsion of air and ensure that the entire space is filled. Once applied, protect from direct exposure to the sun and wind for the first 48 hours. Keep it moist during the initial curing days to achieve maximum final strengths.

Precautions

Do not apply at temperatures below 5°C or above 35°C. Do not apply in adverse weather conditions, such as strong winds, rain, frost, etc. Do not add any additional products that could alter the original contents of the container. Avoid direct contact with eyes and skin. In case of contact, rinse the affected areas with plenty of water.

Storage

It is recommended to keep the bag completely sealed and in areas protected from humidity. The disposal of the product and its packaging must be carried out in accordance with current legislation and is the responsibility of the end user.