Mortars

“Refractory” mortar

El morter sec refractari està especialment formulat per a la construcció de forns, xemeneies, barbacoes, etc. Tant per espais interiors com exteriors, amb maons refractaris.

Available Granulometry: M15

Supply formats

25 kg bag

Main uses

Supply formats

25 kg bag

Instructions

You will achieve perfect homogenisation with approximately 3.5–4 litres of water for each bag, using manual or machine kneading. It is advisable to use mains water and to discard water of dubious or marine origin.

Let the paste rest for 5 minutes before applying.

Ensure it is always applied to surfaces clean of dust and other debris. Also avoid plaster, paint or flaking surfaces. If the air is very dry, it is recommended to dampen the surface beforehand.

Precautions

Do not apply at temperatures below 5 °C or above 35 °C. In adverse climatic conditions (strong winds and high temperatures) the adhesive dries more quickly than normal, reducing its open time. Periodically check that no surface film forms on the applied adhesive. In this case, the product will need to be re-combed or re-applied. Do not add any additional products that could alter the original contents of the container. Avoid direct contact with eyes and skin. In case of contact, rinse the affected areas with plenty of water.

Storage

The product is supplied in 25 kg paper bags, shrink-wrapped on pallets of 32 bags (800 kg). Maximum storage time: 1 year in a fully sealed bag protected from humidity. The disposal of the product and its packaging must be carried out in accordance with current legislation and is the responsibility of the end user.