Coating mortars

Plaster mortar

Pre-dosed, projectable mortar of Portland cement and Bellpuig silica sand, which enhances pumpability and application. Admixed to improve its performance. Suitable for all types of interior and exterior render. Homogeneous product with controlled dosage.

Available Granulometry: GP | CS-IV | W2

Supply formats

Big bag
25 kg bag

Main uses

Supply formats

Big bag
25 kg bag

Instructions

Add 5 litres of water to each bag. To achieve optimal homogenisation, use a mortar mixer or a spraying machine. It is advisable to use tap water. Water of dubious origin or seawater should always be discarded. Always maintain a constant amount of water in the mix to ensure its performance. Ensure the application surface is free of dust and other residues. Not suitable for hydrophobic surfaces. For low-absorbency or smooth surfaces (smooth stripped concrete), the pores must be opened mechanically or a bonding bridge applied. It is advisable to moisten the surface beforehand, especially in dry environments. The recommended thickness of the mortar layer is 1 to 2 cm. If applied to substrates of different nature, a fibreglass mesh reinforcement is advisable.

Precautions

Do not apply at temperatures below 5 °C or above 35 °C. Do not apply in adverse weather conditions, such as strong winds, rain or frost. Do not add any additional products that could alter the original contents of the container. Avoid direct contact with eyes and skin. In case of contact, rinse the affected areas with plenty of water.

Storage

It is recommended to keep the bag completely sealed and in areas protected from moisture. The disposal of the product and its packaging must be carried out in accordance with current legislation and is the responsibility of the end user.